Virtualization, Cloud, Infrastructure and all that stuff in-between

My ramblings on the stuff that holds it all together

Category Archives: NFS

With the move to ESXi is NFS becoming more useful than VMFS?


Now that VMware are moving away from ESX classic (with service console) to the ESXi model I have experienced a couple of issues recently that got me wondering if NFS will be a more appropriate model for VM storage going forward. in recent versions of ESX (3.5 and 4) NFS has moved away from just being recommended for .ISO/template storage and has some big names behind it for production VM storage.

I’m far from a storage expert, but I know enough to be dangerous… feel free to comment if you see it differently.

“out of band” Access speed

Because VMFS is a proprietary block-storage file system you are only able to access it via an ESX host you can’t easily go direct (VCB…maybe, but it’s not easy), in the past this hasn’t been too much of an issue; however whilst building a new ESXi lab environment on standard hardware I found excessive transfer times using the Datastore browser in the VI Client, 45mins+ to copy a 1.8GB .ISO file to a VMFS datastore, or import virtual machines and appliances; even using Veeam FastSCP didn’t make a significant difference.

I spent ages checking out network/duplex issues but in desperation I tried it against ESX classic (based on this blog post I found) installed on the same host and that transfer time was less than 1/2 (22mins) – which still wasn’t brilliant – but I cranked out Veeam FastSCP and did it in 6mins!

So, lesson learnt? relying on the VI client/native interfaces to transfer large .ISO files or VMs into datastores slow and you have to go via the Hypervisor layer, which oddly doesn’t seem optimized for this sort of access. Veeam FastSCP fixes most of this – but only on ESX classic as it has some service-console cleverness that just isn’t possible on ESXi.

With ESX classic going away in favour of ESXi, there will need to be an alternative for out of band access to datastores – either direct access or an improved network stack for datastore browsing

This is important where you manage standalone ESX hosts (SME), or want to perform a lot of P2V operations as all of those transfers use this method.

In the case of using NFS, given appropriate permissions you can go direct to the volume holding the VMs using a standard network protocol which is entirely outside of the ESX/vCenter. upload/download transfers thus are at at the speed of the data mover or server hosting the NFS mount point so are not constrained by ESX.

To me, Fibre Channel was always more desirable for VM storage as it offered lossless bandwidth up to 4Gb/s (now 8Gb/s) but Ethernet (which is obviously required to serve NFS) now has 10Gb/s bandwidth and loss-less technology like FCoE, some materials put NFS about 10% slower than VMFS – considering the vast cost difference between dedicated FC hardware and commodity Ethernet/NAS storage I think that’s a pretty marginal difference when you factor in the simplicity of managing NFS vs. FC (VLANs, IPs vs. Zoning, Masking etc.).

FCoE maybe addresses the balance and provides the best solution to performance and complexity but doesn’t really address the out of band access issue I’ve mentioned here as it’s a block-storage protocol.


Emergency Access

If you have a problem with your vCenter/ESX installation you are essentially locked out of access to the virtual machines, it’s not easy to just mount up the VMFS volume on a host with a different operating system and pull out/recover the raw virtual machines.

With NFS you have more options in this situation, particularly in small environments.


Storage Host Based Replication

For smaller environments SAN-SAN replication is expensive, and using NFS presents some interesting options for data replication across multiple storage hosts using software solutions.

I’d love to hear your thoughts..